Kate's Playground Set

Construct a variable temperature pyrograph

I decided to make a tutorial on how to build a variable temperature for pyrography fixed temperature

Variable temperature for a fixed temperature pyrograph economic


required:
· Scatolare / insert external switches to 2 units;
· Module socket;
· drive / potentiometer for incandescent lamps;
· electric wire + plug;
· Table wooden

Mounting components

Mount the socket module (black in photo) and drive / potentiometer (yellow in photo) at the top of the carton / box.
potentiometer I used has these characteristics:

Connect a wire directly to the module socket (eg photos, blue wire).

Connect the other wire at the entrance of the potentiometer (eg photos, brown wire) and then another wire of the same color (brown) to the output from the potentiometer
(NB comply with what is described in the leaflet potentiometer for the position of the wire is input and the output).
wire output from the potentiometer is connected in the module's input jack.

After connecting the wires, screw the bottom of the carton / box with a piece of wood, of a size such that it can accommodate both the box and the pyrography, then screw the top of the box to the bottom.

At this point the monster drive temperature is ready, we have to connect the pyrography ...
Now we just have to try the pot by turning the wheel (see Note instructions on the operation of the potentiometer, may vary from one model to another).

NB I do not assume any responsibility for the use of this tutorial, get more help from experts in the field.

tutorial copyrighted, you can use images and text only naming the source:

Nunziante Langellotti
http://www.webalice.it/langellottonun ziante /

<$BlogFeedsVertical$>